Antennas

Replacement antennas for CB handhelds.

Folding Tactical Antenna for President Randy 3 (TNC)

PTAC
Add to cart

A folding antenna for the President Randy 3 handheld.

When extended the antenna will give increased performance compared to the original antenna, and then it can be folded for easy transport. You can still receive on the antenna while it is folded.

Will also work on any other handheld that has a TNC antenna socket.

  • Extended length 47cm
  • Folded length 25cm
  • TNC connector

PNI Rubber Duck (BNC)

SOLD OUT

Replacement rubber duck antenna suitable for any CB handheld with a BNC connector.

This is the original antenna for the PNI Escort HP62, but will fit the Midland 42 etc.

Length 20cm.

BNC Rubber Duck

MRW27
Add to cart

A replacement rubber duck CB antenna to fit on any CB handhelds that use a BNC fitting for the antenna. More rigid than the PNI version above.

  • Frequency: 27-28MHz
  • Power Rated: 10 Watts
  • Fitting: BNC Male
  • Length: 25cm


Add to cart

An extra long "rubber duck" antenna to increase the range on a handheld CB that has a BNC fitting.

This antenna is "semi rigid", there is some flex in the bottom part and in the top, but the centre section is solid.

Add to cart

An extra long "rubber duck" antenna to increase the range on a handheld CB that has a SMA MALE fitting.

This antenna is "semi rigid", there is some flex in the bottom part and in the top, but the centre section is solid.

Suitable for use on the tti TCB-H100 & and other handhelds that have a SMA antenna socket.

Add to cart

An extra long "rubber duck" antenna to increase the range on a handheld CB that has a TNC fitting.

This antenna is "semi rigid", there is some flex in the bottom part and in the top, but the centre section is solid.

Suitable for use on the President Randy, Randy 3, kPo Panther and any other handhelds that have a TNC antenna socket.

Rubber-Duck (BNC)

HH6
Add to cart

Slim flexible rubber antenna to fit on modern handhelds which have a BNC socket (eg Midland 42).

Current stock are original Midland 42 antennas.

Rubber-Duck (TNC)

HH2
Add to cart
President Randy Original Antenna

Slim flexible rubber antenna to fit on modern handhelds which have a TNC socket (eg Maycom, RadioShack, President etc).

These are the original antenna for the President Randy.

Albrecht Extra Long Rubber-Duck (TNC)

HHL1
Add to cart

Slim extra long (53cm) flexible rubber antenna to fit on modern handhelds which have a TNC socket.

This will give increased performance compared to the standard short rubber duck.

Albrecht Extra Long Rubber-Duck (BNC)

HHL2
Add to cart

Slim extra long (53cm) flexible rubber antenna to fit on modern handhelds which have a BNC socket.

This will give increased performance compared to the standard short rubber duck.

Intek 520 Rubber Duck

T52a
Add to cart
 

Original replacement antenna as supplied with the Intek H-520 handheld.

BNC fitting.

Rubber-Duck (push on)

X18
Sold Out

Rubber duck antenna for the old handhelds which had a large telescopic antenna (eg Harvard 410T, Harrier, Moonraker).

The rubber duck simply pushes over the top of the telescopic antenna.

Sold Out

Rubber duck antenna for the old handhelds which had a large telescopic antenna (eg Harvard 410T, Harrier, Moonraker).

The rubber duck pushes over the top of the telescopic antenna and then tightens onto it with a thumbscrew.

Add to cart

A compact magnetic mount with a BNC female connector on the top of it and a BNC plug on the end of the cable.

Ideal for fitting the antenna from your handheld on to use mobile.

Suitable for various 2m/70cm handhelds and PMR446 handhelds.

  • 6.8cm base
  • 4m mini RG58 coax
  • BNC plug